• No products in the cart.

PROFESSIONAL TEXTILE CARE SINCE 1972

Our products – from the
professional equipment for
small self-service laundries to
the bigger industrial machines –
are characterized by maximum
reliability, high quality, durability,
low consumption and reduced
maintenance costs.

Our company has been working
in the laundry industry since
1972, producing of a full range
of machines and equipment for
wet cleaning, drying, ironing and
the general treatment of linen.

Within a district of mechanical
processing excellence, we have
been able to take advantage
of the high specialization and
professionalism achieved by
some local companies, assigning
them the realization of some
components but managing directly
the R&D, the design, the assembly
and the quality control. Since our
foundation we have always paid
great attention to innovation,
design, ergonomics and maximum
energy efficiency.

grandimpianti logo
Grandimpianti ajalugu

GRANDIMPIANTI WASHING MACHINES – ready for work!

QUALITY STARTS WITH MATERIALS.

In our high-spin washing machines we use superior quality materials to avoid corrosion, reduce limescale deposits, ensure high waterproofness and a longer life of the components.

AISI304
for basket and tank.

EPDM® rubber for
the water inlet pipes.

INCOLOY® antilimescale steel for
the electric resistors.

VITON® high
temperature rubber
for the sealing ring

Cast iron for
bearing seats and
counterweight.

Grandimpianti pesumasinad

SAFETY IN EVERY PHASE

Our washing machines have doube and redundant safety devices like airplanes: automatic magnetothermic switch, isolation transformer, door lock with redundant sensors, safety pressure switch and numerous other sensors, all connected to the safety card powered at low voltage (24Vac).

The protection
of health and
safety and the
prevention of
accident factors
at the workplace.

The proper
functioning of
the equipment
everywhere
and under all
circumstances.

Constant monitoring
of the water level and
the basket operation.

No cases of
electromagnetic
interference with
equipment nearby.

The protection of
components from
abnormal absorption
and surges voltage.

Grandimpianti pesumasinad ohutus
Grandimpianti pesumasinad 2

ERGONOMICS WITHOUT SIZE LIMITS

We wanted to simplify the work in the laundry and make it less hard, that’s why we worked on the ergonomics by carefully defining every aspect of our machines such as:

Extra-large
porthole (from
330 to 540 mm)
for a quick loading
and unloading
of the laundry.

Door opening
up to 180° for
simplify the use
of the laundry
trolley.

7″ display always
visible and easily
usable with
gloves.

Simplified
inspection and
maintenance due
to the access only
from the front
and rear
of the machine.

Screen position,
inclination and
orientation.

Speed

In their highest configuration, these washing machines allow to process up to 420 kg of laundry per day (7 cycles in 8 hours). The structure is particularly strong and suitable for intensive work, the engine, positioned at the bottom, keeps the center of gravity close to the floor reducing vibrations and noise. The inverter technology, finally, allows gradual starts and slowdowns while preserving the linen and the
mechanical elements.

Intelligence

Six versions available (from 75 to 280 liters) characterized by great functionality, design, ergonomics and innovative technology able to ensure high energy savings, flexibility, minimum wear and great performance.

SUSTAINABILITY IS A MATTER OF DETAILS

The presence of the patented dynamic DWS (GWH 80-280) and manual MWS (GWH 350-600) weighing systems, a large 3″ motorized drain valve under the tank (without any connecting pipes) and an intelligent water mixing system with triple input (hot, fresh and hard water), allows us to:

Save more than 50%
of the detergents.

Use less detergent
thanks to the
possibility of loading
soft water which is
less calcareous.

Limit the waste
(no deposits of water
and detergent in
pipes or internal
connections).

Get better
washing
performance.

Reduce process times
(quick discharge, no
need to heat the
water because it’s
served by the water
supply network).

Up to 96%
recyclability rate
thanks to the
materials (e.g.
skinplate) and the
accurate design.

It helps you to
increase the
productivity by
optimizing the time
in the intermediate
stages.

Grandimpianti pesumasinad säästlikkus
Grandimpianti pesumasinad hooldus

MAINTENANCE IS AT AN ALL TIME LOW

Limiting the components’ wear by extending their life means significantly reducing maintenance works. That’s why:

We only use high
quality materials.

Our electrical
and electronic
components are
boxed (no humidity,
dust and heat
damages).

We use a special
water slowdown
system for the
spin-cycle: the water,
while coming inside
for the next phase, it
reduces the speed of
spin-cycle and also
the time requires
for the intermediate
steps, without
any mechanical
consequences.

We provide
for continuous
lubrication of the
bearing seats.

The 3D imbalance
detection sensor
prevents the extreme
movements and
preserves the
durability of the
moving elements.

GRANDIMPIANTI DRYERS – Eco-friendly and efficient!

SUSTAINABLE FOR YOU AND THE PLANET.

GD Wavy tumble dryers are designed to guarantee a longer life cycle and a lower environmental impact as well as unmatched results in terms of speed, energy savings and drying performance.

Since linen inside a dryer endures a radical transformation, rapidly passing from very heavy and damp to lightweight and voluminous, it’s crucial being able to rely on a dynamic, professional and qualified system such as our drying diagram, which ensures:

  • High evaporation capacity
  • No friction between fibers
  • No felting
  • No clothes shrinkage
  • Just dry and softness
Grandimpianti trummelkuivati
Grandimpianti professionaalne kuivati
PROFESSIONAL FOR SAVINGS TOO.

Thanks to advanced construction systems, excellent materials and innovative technology, our equipment reduce energy consumption and increases the productivity of your laundry.

  • The average energy consumption is of 1kW/kg
  • You earn up to 12 minutes for each cycle (equal to about 3-4 cycles every 8 working hours)
BUSINESS-CENTRIC MACHINES.

From the intelligent control system to the remote management, from ergonomics to materials, everything is designed to reduce waste, limit the maintenance interventions and make the most of the machine’s potential.

Our goal is to allow you to focus on your business wherever you are without limitations or interruption.

Ready to work, anywhere!

Reliability, safety and high performance are the result of a long and careful design and selection of materials. Nothing is left to chance and every choice, from the type of the gaskets to the shape of the drum, aims to ensure maximum efficiency, quality and durability.

We’ve always been opened to the world and to the needs of our customers that now, more than ever, they ask us for speed, connectivity and convenience. For this reason we’ve developed versatile and innovative equipment, ready for different environments, sectors and geographical areas, able to make the job faster, easier and more effective.

HIGH-END TECHNOLOGY.

The drum placed inside a tank insulated with 25mm of ceramic fiber, the presence of an exclusive air preheating path which, at the same time, cools the engine, the use of 92% recyclable materials (e.g. skinplate) and the adoption of a drying diagram instead of the classic countdown, allow us to:

Reduce the energy
consumption by
modulating the
cycle’s intensity and
duration.

Minimize heat loss
and waste.

Fully exploit the
potential of the air
flow.

Reduce the time
and energy required
to bring the air to
the established
temperature.

Minimize the
environmental impact
of the machine also
in its final chapter.

EFFICIENCY GETS A MAKEOVER.

Ensuring flawless results requires a global vision of the drying process which also includes the ergonomic aspect: working in a nice, healthy and functional space simplifies and speeds up your daily activities by improving also the performance. That’s why we have carefully studied every detail:

55db of noise
during the drying
phase.

Porthole at
700-830 mm
from the floor to
allow the direct
approach with
the trolley.

Door opening
up to 180 °
(reversible
opening on
request) to allow
the placement of
the trolley

Porthole diameter
of 612 mm for a
quick loading and
unloading of linen.

Cold external
panels (no
dispersions)
even at highest
temperature.

Easy and frontal
access to the lint
filter system

Ergonomic and
contemporary
design with shiny
fronts and rounded
corners: we use the
same look of the
washing machines.

Display oriented
towards the user
made of easy-toclean tempered
glass.

grandimpianti logo

Industrial washing machines

Machines ready to work wherever you need!